All Over

Olic gave Bayern Munich 2-1 Man Utd win MUNICH (AP) – Ivica Olic scored in overtime Tuesday to give Bayern Munich a 2-1 win against Manchester United in the quarterfinals round of the Champions League.
Its All Over-Three Days Grace

LE MYSTEREY NO 9 NEW NWT $79 BRA 30E 30 E SEA FOAM GREEN PADS ALL-OVER LACE $49.99

FLEXEES~ALL OVER~ FIRM CONTROL SINGLET~L $19.99

Polo Ralph Lauren All Over Pony Print Boxer Shorts Men’s Medium Spring Summer $12.69

Nikita “All Over You, All Over me” 12″ Record Vinyl RECC1 $13.00

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $12.45

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $12.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $13.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $12.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $16.45

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $12.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Victoria’s Secret Pink with a Splash All-Over Body Mist 8.4oz 8.4 oz 250mL New $11.95

Nite Flower Fairies Allover Fabric in Shades of Blue NEW! $5.25

Mattel Barbie Doll Heads Allover Toilet Seat Cover Set $19.00

Lot 2 Hole in None Over Calf All Sport Tube Sock 7-9 Shoe Size 12.5-4 Stripe YTH $7.99

Lot 4 Hole in None Over Calf All Sport Tube Sock Size 10-14 Stripe For Adult New $14.99

Bare Escentuals BareMinerals All Over Face Color True 1.5g Makeup $29.54

NAILS INC COLLECTION ALL NEW INCLUDING INSTYLE WORTH OVER £110 $78.99

NEXT JACKET IN SIZE 10L WITH TINY V CHECK ALL OVER $6.31

Cerruti 1881 Uomo Coffret: EDT Spray 100ml3.4oz + All Over Shampoo 50ml1.7o 3pcs $79.85

JSA in All Star Squadron 50 DC Special Crisis Cross Over 1985 NM Unread $0.99

2 The Body Shop Atomiser The Sparkler All Over Shimmer 02 Enchanting Gold NEW $39.99

2 The Body Shop Atomiser The Sparkler All Over Shimmer 01 Boudior Pink NEW $39.99

Vintage 80s Designer GOLD CHAIN All Over Print MADE IN FRANCE Silk Scarf P $139.99

Vintage 80s Designer GOLD CHAIN All Over Print MADE IN FRANCE Silk Scarf Q $149.99

Vintage 90s Designer MONOGRAM Geometric ALL OVER PRINT Hip Hop Bandana J $44.99

OLD ALL HAND CARVED N. INDIA BEADS, PENDANTS, ETC. – OVER AN ENTIRE HALF POUND $19.95

Airplanes Flying All Over The World On A Brand New Tie! $6.00

The Canadian Flag All Over A New 100% Polyester Neck Tie! $7.00

SHOCK Vol 3 #3 Monsters and Snakes Attack all Over Cover 1971 $31.99

Cell Phone Allover Fuchsia Flower 2 Compartments Wrist Bag $7.29

BEBE dress halter purple dress P/S ALL OVER RUCHED $44.99

Angels All Over Town, Luanne Rice, Good Book $1.00

8.5 black and gray with silver glitters all over, the pattern is outstanding . $10.00

Zack Knight – All Over Again [3 TRACK PROMO CD] $3.15

COACH BLACK AND WHITE PONY TAIL SCARF WITH COACH WRITTEN ALL OVER $15.49

ALLOVER DESIGN RED COLOR 8X11 TABRIZ PERSIAN ORIENTAL AREA RUG WOOL CARPET $1,833.75

ESTATE SALE HUGE LOT OF WATCHES OVER 30 lb ALL NEED REPAIR SOME GOLD PLATED $147.70

L nwt Genuine HARLEY DAVIDSON **All Over Print Rhinestone** Tank Top L $29.50

8.5 black and gray with silver glitters all over, the pattern is outstanding . $12.00

Maroon 5 Hands All Over signed autographed CD PSA DNA $165.75

Nadri Allover Pavé Hinged Cuff Nordstrom Exclusive $150.00

Deja Vu All Over Again by John Fogerty (CD, Sep-2004, Geffen) BIN MINT $4.99

Dajae – Is It All Over My Face 12″ Vinyl Near Mint $9.60

MISSONI for TarGet Small 4’11″ to 5’5″ Women’s All Over Space Dye Tights – Blue $28.00

Calvin Klein OBSESSION (lot of 4) After Shave Balm & all over body wash 1 oz $9.99

Lee Emerson – 1957 ROCKABILLY PROMO – Start All Over – Columbia 40985 $9.99

The Best of Southern Living: [Over 500 of Our All-Tim.. $0.99

San Francisco Chronicle Orange All Over 11/7/2010 NOT a $3.88

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Barely There Go Girlie “Foxx” All-Over Lace Bikini 3 Pk Style 2122 4 Colors $14.50

Culligan FM-15A Level 3 Faucet Filter $13.49 The Culligan FM-15diy faucet mount water filtration system will improve your quality of life to the point where you’ll want to scream “Hey, Culligan man!” just to thank him for helping to make such healthful, refreshing water available. This do-it-yourself system screw-mounts to your existing water faucet and comes with everything you need for up to 200 gallons of crisp, clear water….

Cuisinart GR-4N 5-in-1 Griddler $185.00 The Cuisinart(tm) Griddler makes “multifunctional” an understatement! Make perfect panini… plus! With four separate cooking options, it can handle everything from pancakes to sausages to grilled cheese to steaks, hamburgers and panini. It helps you prepare more servings of more kinds of food in less time, so you can cook for a crowd — no one has to wait!Simply change the cooking plates and adju…

Cuisinart TOB-40 Custom Classic Toaster Oven Broiler $65.99 Product Features: Toast, Bagel, Bake and Broil functions 1800 watts Full size interior holds and 11 pizza and 4-slices of toast Stainless Steel front with rubberized easy grip dials and cool touch handle Always Even Shade Control monitors the temperature and adjusts the timing to consistently toast to the shade selected every time! Convenient auto slide-out rack for hands-free loading and easy re…

Chief $9.99 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed….

Lungs $6.80 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed….

Lungs $7.99 …

A Matter of Loaf and Death $1.99 …

Protection Circuit Module for 15 Cells LiFePO4 Battery Pack (Working: 10A) $87.49 Specifications of 4 Series LiFePO4 Batteries Charge & Discharge Guard Shield Application The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Features Provide protection function and balance function to 15 cells High Power LiFePO4 Battery in series. Over voltage, under voltage, over current, short circuit. Bleeding for cell balance. Low power consumption. Functions:The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point.Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point.Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery group’s output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit.Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery group’s capacitance.Function of low-current lockseries connection of low-current lock gets reserved and low current controls on-and-off of the main high current to make it safer and more convenient. Specification Overcharge Detection Voltage3.90V (3.87V-3.93V)Overcharge Release Voltage3.80V (3.77V-3.83V)Balance Activation Voltagecells voltage greater than 3.6VBalance Release Voltagecells voltage less than 3.6VBalance Current75mAOverdischarge Detection Voltage2.00V (1.95V-2.05V)Overdischarge Release Voltage2.30V (2.25V – 2.35V)Overcurrent Detection Current25A (20A-30A)Max. Continuous Discharge Current14ACurrent Consumption in Normal Operation (B-)less than 10uACurrent Consumption in Overdischarge and Load not Removed (B-)less than 200uACurrent Consumption in overdischarge and load removed (B-) less than 10uAOperatingTemperature Range-20~+60CHumidity0~90% Rh (No waterdrop)StorageTemperature Range+10~+30CHumidity0~90% Rh (No waterdrop) Download product data sheet here.Usage and Attention:After purchasing the protection mold, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be cau

Protection Circuit Module For 3 Cells LiFePO4 Battery Pack $37.56 Untitled DocumentSpecifications of 3 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance. Function of low-current lockseries connection of low-current lock gets reserved and low current controls on-and-off of the main high current to make it safer and more convenient.Specified TypesYS80725.Technical Index Item 3series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Shortcircuit protectionyesLow-currentlockyesConnection reservedTemperaturecharacteristic??1.0mv/ Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<180normal Vn=3.2v<20Under-voltage Vn2.2v????loadedDimension (mm)59 x 44 x 8Weight(gram)23 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line s

Protection Circuit Module for 4 Cells LiFePO4 Battery Pack (20A/33A) $42.6 Specifications of 4 Series LiFePO4 Batteries Charge & Discharge Guard Shield Application The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock.Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point.Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point.Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery group’s output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit.Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery group’s capacitance.Specified Types4S LFP PCM Technical Index ItemSpecificationBattery TypeLiFePO4 BatteryBattery Cell4 CellsInput Charging Voltage14.6??0.3VInput Charging Current20AContinuous Discharge Current20AOver Charge Detection Voltage (Cell)3.900??0.025VOver Charge Release Voltage (Cell)3.800??0.050VOver Discharge Detection Voltage (Cell)2.000??0.050VOver Discharge Release Voltage (Cell)2.300??0.100VOver Discharge Detection Current33??5ABalance Open Voltage (Cell)3.600??0.025VBalance Release Voltage (Cell)3.600??0.050VBalance Current (Cell)65??5mAShort Circuit ProtectionHaveDetection Delay Time300-5000uSRecovery ConditionDisconnect LoadMain Loop Electrify Resistance 20m Current Consume in Normal Operation 50??A Dimension (mm)75 x 50 x 1.6Weight(gram)27 Download product data sheet here.Usage and Attention:After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused.When lines get connected, bits of copper and tin should not cling to the guard shield.Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side.When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent th

Energizer Industrial D Size (EN95) Alkaline Battery $1.8 Energizer Industrial Alkaline batteries are produced to the same specifications as Energizer Long Life Alkaline batteries – and designed for today’s heavy current or continuous applications. Offer the longest lasting power source of all primary batteries over a range of sizes. No mercury added.Special disposal is not required. Operate well in temperature extremes -30C – 55C.Excellent shelf life – alkaline cells are ready for use after 5 years of storage.

1 Box: 12pcs Industrial Alkaline D Size (EN95) Batteries $20.95 Industrial Alkaline D Batteries – 12 Batteries per Pack Energizer Industrial Alkaline batteries are produced to the same specifications as Energizer Long Life Alkaline batteries – and designed for today’s heavy current or continuous applications. Offer the longest lasting power source of all primary batteries over a range of sizes. No mercury added.Special disposal is not required. Operate well in temperature extremes -30C – 55C.Excellent shelf life – alkaline cells are ready for use after 5 years of storage.

1 Box: 12pcs Energizer Industrial 9V Size (EN22) Alkaline Batteries $32.95 Energizer Industrial 9V Alkaline Batteries 12 per Pack EN22 Energizer Industrial Alkaline batteries are produced to the same specifications as Energizer Long Life Alkaline batteries – and designed for today’s heavy current or continuous applications. Offer the longest lasting power source of all primary batteries over a range of sizes. No mercury added.Special disposal is not required. Operate well in temperature extremes -30C – 55C.Excellent shelf life – alkaline cells are ready for use after 5 years of storage.

Protection Circuit Module For 6 Cells LiFePO4 Battery Pack $51.78 Untitled DocumentSpecifications of 6 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance. Function of low-current lockseries connection of low-current lock gets reserved and low current controls on-and-off of the main high current to make it safer and more convenient.Specified TypesYS70523 Technical Index Item 6series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Shortcircuit protectionyesLow-currentlockyesConnection reserved Temperatureprotection ( )65Connection reserved Temperaturecharacteristic??1.0mv/ Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<180normal Vn=3.2v<20Under-voltage Vn2.2v????loadedDimensions (mm)71 x 48 x 8Weight(gram)34 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group w

Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 15A Working (30A cut-off) $79.32 Untitled DocumentSpecifications of 8 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80301 Technical Index Item 8series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option)Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v??Under-voltage) Dimensions (mm)79 x 48 x 7Weight(gram)26 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding ou

Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 30A Working (60A cut-off) $95.16 Untitled DocumentSpecifications of 8 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80301 Technical Index Item 8series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)30Overcurrent protection (A)60Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option) Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v Under-voltage) Dimensions (mm)94 x 60 x 7Weight(gram)62 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding ou

Protection Circuit Module For 12 Cells LiFePO4 Battery Pack 15A $98.52 Untitled DocumentSpecifications of 12 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80302 Technical Index Item 12 seriesbalancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option)Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v Under-voltage) Dimensions (mm)120 x 60 x 9 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding output lines,

Protection Circuit Module For 12 Cells LiFePO4 Battery Pack 30A $115.2 Untitled DocumentSpecifications of 12 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80302 Technical Index Item 12 seriesbalancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)30Overcurrent protection (A)60Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option)Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v??Under-voltage) Dimensions (mm)120 x 60 x 9Weight(gram)78 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding

Protection Circuit Module For 16 Cells LiFePO4 Battery Pack 15A $123.54 Untitled DocumentSpecifications of 16 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80303 Technical Index Item 16 seriesbalancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (Option)Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v Under-voltage) Dimensions (mm)145 x 60 x 9Weight(gram)90 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding

Protection Circuit Module For 16 Cells LiFePO4 Battery Pack 30A $146.1 Untitled DocumentSpecifications of 16 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80303 Technical Index Item 16 seriesbalancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)30Overcurrent protection (A)60Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option) Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v Under-voltage) Dimensions (mm)145 x 60 x 9Weight(gram)98 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding

Card: Tenergy 4 Pcs RCR123A 3.0V 900mAh Rechargeable Li-Ion Protected Batteries w/ Smart Charger $49.99 Charger Features Higher capacity for longer running time in your devices.Worldwide usage. Auto AC power adjust from 100-240V.Smart, build-in microprocessor automatically switch off when batteries are fully charged.Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification.Convenient, 12V car cigarette lighter plug for on the road charging.Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories.Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. RCR123A Features Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage. Fully protected against over-charge, over-discharge, over-current and short-circuit.Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary CellsReplace the most of non-rechargeable CR123A primary Lithium battery for a digital cameras and flashlightModified Voltage to achieve 3.2v at full voltage; once loaded, cell voltage drops to 3.0v.Internal over-charge and over-discharge protection to prevent battery over use. The current will be shut off when the battery voltage drops below 2.5V. Capacity Nominal600mAhMaximum:900 mAh Internal Voltage Regulators.Dimension16 D x 34 H mm. (The height 34mm includes the button top).Weight17 g or 0.6 Oz.Tenergy Li-Ion RCR123A 900mah batteries reach more than 3.0v at full charge. These cells should only be used in high quality CREE LED flashlights. Do not use in incandescent bulb flashlights! * NOT COMPATIBLE WITH SUREFIRE FLASHLIGHTS. Can replace the disposable (one-time use) version of CR123A Lithium Primary Batteries. CR123A Also Known As:123, 123A, 123-SANYO, 5018LC, 6205, BR2/3A, CR123, CR123-2, CR123-A, CR123A, CR123A-2, CR123R, CR-123, CR17335, CR17345, DL123, DL123A, DL123A2, DL123AB, DL-123, DL-123AB, DLCR123, EL123, EL123A, EL123AP, EL123-AP, EL123AP2, EL123AP-2, K123, K123A, K123LA, K123LA-1, L123A, PL123, PR123-1, PR123-2, PRCR123-1, PRCR123-2, RL123A, RL123A-1, RL123A-2, SF123, SF123A, SF123A1, ULCR123R, VL123, VL123A Compatible Camera Equipment:AnscoCanonEdixaGraflexJazzKonicaMaxellPrakticaSamsungVartaArgusCarenaEternacellHakingJenoptikKonica MinoltaMinoltaPremierSigmaVivitarBell & HowellChinonExaktaHanimexKalimarLEDPanasonicRadio ShackSmyangVoigtlanderBootsConcordFujifilmHorsemanKinonLeicaPlatonRicohSoligorYashicaBraunContaxGokoHyundaiKodakLenmarPolaroidRolleiToshibaOther Compatible Devices LED Flashlights (such as Olight, ITP, etc)Electronic CigarettesDog CollarsLasersNot compatible with Surefire and other brands of incandescent(halogen, krypton, xenon, etc) flashlights.

Tenergy 75 Watt Power Inverter $35.72 The power inverter can convert DC 12V electricity provided by the automobile into AC power. It can be widely used with all types of electronic equipment with power consumption of less than 75W (i.e, notebooks, cellphones, razors, digital cameras, digital videos, TV, CD, DVD, game machines, cleaners, refrigerators, electric lights, chargers and various kinds of professional tools). As the necessity for your travel, mobile office, outdoor work and special vehicle it is the very solution to using electricity in the automobile. SpecificationsSoft start function to prolong the life of the product Product features a multiple protection of short circuit, low voltage, overload, over-current, high temperature and high voltage to ensure safety of equipment and automobile Socket is versatile and suitable for various types of plugs Operation GuideInsert the front part of this product into the cigarette lighter socket of the automobile Make sure that the power indicator light is on Insert the power plug of your electrical appliance into the socket of this product Please remove this product from the cigarette lighter socket when not in use Technical ParameterInput Voltage Range – DC 11V-15V Output Voltage Range – AC 110V Output Voltage (USB) – 5V 1A, 2A MAX. Peak Power- 200W Max. Output Power- 100W Continuous Output Power – 75W Over Voltage Shutdown- DC 15V-16V Low Voltage Shutdown – DC 10V-10.5V Output Frequency – 50Hz or 60Hz USB Output- 5VDC 1A cont. It can charge for iPod, iPhone Converter Efficiency – >90% Protections – Short circuit, overload, over temperature, low battery voltage, over battery voltage Indicator- Dual color LED(Greenoperation, Redshutdown) Packing informationProduct size – 114x60x36mmProduct net weight – 145gPackage – Each piece into a blister package, 50pcs/ctnCarton size – 47.5×39.5×19.5 cm, 0.0366CBMG.W./N.W. – 9.3 kg/8.5kg HighlightsSoft startInput & output isolatedSurge protection

Tenergy 120 Watt Power Inverter $34.99 The power inverter can convert DC 12V electricity provided by the automobile into AC power. It can be widely used with all types of electronic equipment with power consumption of less than 120W (i.e, notebooks, cellphones, razors, digital cameras, digital videos, TV, CD, DVD, game machines, cleaners, refrigerators, electric lights, chargers and various kinds of professional tools). As the necessity for your travel, mobile office, outdoor work and special vehicle it is the very solution to using electricity in the automobile. SpecificationsSoft start function to prolong the life of the product Product features a multiple protection of short circuit, low voltage, overload, over-current, high temperature and high voltage to ensure safety of equipment and automobile Socket is versatile and suitable for various types of plugs Operation GuideInsert the front part of this product into the cigarette lighter socket of the automobile Make sure that the power indicator light is on Insert the power plug of your electrical appliance into the socket of this product Please remove this product from the cigarette lighter socket when not in use Technical ParameterInput Voltage Range- 11-15VDC Output rated power- 120 Watts continuous, 150 Watts max. Output Voltage & frequency- 110V 60Hz Output voltage for USB charging port – 5V 1A, 2A MAX. Indicator – Dual color LED (Green~operation Red~shutdown) Protections- Short circuit, overload, over temperature, low battery/voltage, over battery voltage Over Voltage Shutdown – DC 15V-16V Low Voltage Shutdown – DC 10V-11VPacking informationProduct size – 86x55x31mmProduct net weight- 175gPackage- Each piece into a blister package, 40pcs/ctnCarton size- 55.2×33.2×21.5cm, 0.0394CBMG.W./N.W. – 9.2kg/8.8kg HighlightsUniversal socket/US socket/Japanese socket applicableCar/Airplane adaptors for your optionSoft startInput & output isolatedAuto temperature control fanSurge protection

2-6 Cell Lipo Pack Balancer $46.99 Untitled Document Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 22.2 volts (6S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it’s balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the “Accessories” category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Lithium pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LED’s will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps and wait until the LED’s begin to blink again. This indicates that at least one cell has reached 3.7 volts or more. Disconnect balancer and then reconnect for another Low Voltage Test. Repeat as needed until all LED’s turn on for 5 seconds indicating that all cells have at least 3.2 volts. Then you can proceed to charge normally. Balancing While Charging Connect the balancer and wait for the low voltage check.If all cells show 3.2 volts you can proceed with a normal charge sequence. The LED lamps will remain off until one cell reaches a voltage of 3.7 volts. Then balancing will begin. By the time the charge is complete the pack should be balanced. If the cells blink at random the pack is closely balanced. If a few LED’s remain on all the time these cells have a higher voltage then the other cells and more balancing is needed. When the charge is almost complete all the LED’s will turn on. Balancing After Charging Connect the Balancer to the pack. The balancer will begin discharging every cell that has more than 4.15 volts. When all cells are 4.15 volts or less then the balancer will begin balancing to the lowest cell. When all Led’s turn off or occasionally blink at random, then the pack is balanced

Tenergy Li-Ion 18650 Cylindrical 3.7V 2600mAh Button Top Rechargeable Battery w/ PCB $9.25 NoteThis Button Top Version is most suitable for Flashlights that uses Cylindrical 18650 Li-Ion Cells.Unique and New! With PCB protection! Li-Ion 18650 cylindrical rechargeable batterieswith Internal Voltage protection PCB! Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. Unique PCB design and patent pending. 3.7V 2600mAh high capacity Higher energy density and lower weight than other rechargeable batteries Manufactured under ISO9001-2000 to assure quality Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time Applications Lighting or other device that needs 3.7V power Building portable power device needing high energy density and low weightWarning CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging, and assembly before use. Put the batteries in fire-proof container Do not put batteries on wood surface or carpet when charging Neverleave battery un-attended when charging We are not responsible for damage of any modification of the batteries in form, shape or made into packs We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteriesProduct Specifications Capacity* Nominal 2600 mAh, Minimum 2500 mAh Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.35V. UNIQUE INTERNAL PCB! Dimensions Diameter19 mmHeight69.5 mm Weight (Typical) Approx. 50 g Nominal VoltageAverage 3.7V Discharge Voltage3.0V Internal Impedanceless or equal to130 milliohm (with PTC) Cycle Performance90% of initial capacity at 400 cycles Cycle life> 500 cycles Standard Charge Current0.2C (Cut-off Current0.01C)Fast Charge Current0.5C (Cut-off Current0.01C) Standard Discharge Current0.5C (End Voltage = 2.75V) Max. Discharge Current1.5C Internal PCB Specifications .style2 {border-stylesolid;border-width1pt;}.style3 {border-stylesolid;border-width1pt;border-collapsecollapse;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.325??0.05V Over Charge Release Voltage4.125??0.10V Over Discharge ProtectionOver Discharge Detection Voltage2.5??0.10V Over Discharge Release Voltage2.9??0.10V Rated Operational Current3.5A Over Current ProtectionOver Current Detection Current6-8ARelease ConditionCut load Detection Delay Time8.016.0ms Short Circuit ProtectionDetection ConditionExterior Short CircuitRelease ConditionCut Short CircuitInterior ResistanceMain Loop Electrify Resistance VC=4.2V; RDS40m Current ConsumptionCurrent Consumption in Normal Operation4.0A Type 8.0A Max Dimension (LxWxH)R8.65 x 0.5 mm*Notedo not use Button Top version with Tenergy Multifunctional Charger.

4pcs Tenergy Li-Ion 18650 Cylindrical 3.7V 2600mAh Button Top Rechargeable Batteries w/ PCB $39.99 NoteThis Button Top Version is most suitable for Flashlights that uses Cylindrical 18650 Li-Ion Cells.Unique and New! With PCB protection! Li-Ion 18650 cylindrical rechargeable batterieswith Internal Voltage protection PCB! Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. Unique PCB design and patent pending. 3.7V 2600mAh high capacity Higher energy density and lower weight than other rechargeable batteries Manufactured under ISO9001-2000 to assure quality Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time Applications Lighting or other device that needs 3.7V power Building portable power device needing high energy density and low weightWarning CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging, and assembly before use. Put the batteries in fire-proof container Do not put batteries on wood surface or carpet when charging Neverleave battery un-attended when charging We are not responsible for damage of any modification of the batteries in form, shape or made into packs We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteriesProduct Specifications Capacity* Nominal 2600 mAh, Minimum 2500 mAh Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.35V. UNIQUE INTERNAL PCB! Dimensions Diameter19 mmHeight69.5 mm Weight (Typical) Approx. 50 g Nominal VoltageAverage 3.7V Discharge Voltage3.0V Internal Impedanceless or equal to130 milliohm (with PTC) Cycle Performance90% of initial capacity at 400 cycles Cycle life> 500 cycles Standard Charge Current0.2C (Cut-off Current0.01C)Fast Charge Current0.5C (Cut-off Current0.01C) Standard Discharge Current0.5C (End Voltage = 2.75V) Max. Discharge Current1.5C Internal PCB Specifications .style2 {border-stylesolid;border-width1pt;}.style3 {border-stylesolid;border-width1pt;border-collapsecollapse;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.325??0.05V Over Charge Release Voltage4.125??0.10V Over Discharge ProtectionOver Discharge Detection Voltage2.5??0.10V Over Discharge Release Voltage2.9??0.10V Rated Operational Current3.5A Over Current ProtectionOver Current Detection Current6-8ARelease ConditionCut load Detection Delay Time8.016.0ms Short Circuit ProtectionDetection ConditionExterior Short CircuitRelease ConditionCut Short CircuitInterior ResistanceMain Loop Electrify Resistance VC=4.2V; RDS40m Current ConsumptionCurrent Consumption in Normal Operation4.0A Type 8.0A Max Dimension (LxWxH)R8.65 x 0.5 mm*Notedo not use Button Top version with Tenergy Multifunctional Charger.

Li-Ion / Li-Po 6 Cells 22.2V 2A Battery Charger $49 Features 100V – 240V AC input for worldwide power support. Constant charging current for faster charging. Stabilized output – low ripple! It can charge any 22.2V Li-Ion battery pack with capacity at & over 2000mAh. Safety protection Over voltage protection. Short-circuit protection. Polarity error protection.The charger turns off when battery is full then goes to trickle charging mode 1/10C.Operating Indication Charging ——- Red LED Fully Charged— Green LEDSpecification InputAC 100-240V 50-60Hz 1.0A OutputDC 25.2V Charging Current2000mAWarning Charge 22.2V Li-Ion rechargeable battery pack only. Don’t expose charger to rain or humidity for prevention from electric shock. It is normal for charger to get slightly hot when use. Keep the product out of children’s reach. DO NOT remove charger cover to prevent from electric shock.

Combo: BC1HU Universal Smart Charger + 4 C 5000mAh & 4 D 10000mAh NiMH Rechargeable Batteries $139.99 Charger (May be the Best Charger in the Market) Easy to use, FAST and Universal for different types of batteries (AA, AAA, C, D, and 9V).Powered by an external AC adapter Intelligent microprocessor controlled With negative delta V (- delta V) cut-off function for better life time battery performance Use constant current pulse charging system Each charging group is individual programmable in its function Recharges batteries in all capacities – 1 to 4pcs AAA, AA, C, D and 1 to 2pcs 9V Ni-MH and Ni-Cd batteries can be mixed to charge at the same time Recharges batteries in single or group Automatic charge and discharge function Automatic charge/discharge current selection for the different size of batteries Identification of defective cells Over temperature and short circuit protection With protection against wrong polarity Individual LED to indicate discharge, fast charge and trickle charge With maximum charging timer control for overcharge protection Charging time for different types of empty batteries PackingEach in a gift box Battery SizeBattery Capacity (mAh)Charging TimeAAA180mAh-1000mAh1-3 1/2 hrsAA500mAh-2700mAh1 1/2-5 hrsC1200mAh-5500mAh2 1/2-5 1/2 hrsD1200mAh-10000mAh3-10 1/2 hrs9V Block100mAh-250mAh6-11 hrs High Capacity Rechargeable Batteries High quality C size and D size high capacity nickel hydride metal (NiMH)rechargeable batteries Super long running time with this high capacityC 5000 mAh and D 10000 mAh Economic package provides huge savings Very long life time and can be recharged up to 1000 times. Can provide over $1000 savings over the life time of this rechargeablebatteries by eliminating the need to buy hundreds of C/D size Alkaline batterieswhich cost $4.49 a pair. Exact replacement for standard C size batteries and NiCd rechargeablebatteries Convenient operation due to the advantage that NiMH batteries have nomemory effect. Can be charged anytime Can be rapidly charged with smart chargers and universal chargers Battery tested based on International Electronic Commission (IEC)standard to ensure capacity, quality and life time Technical Specifications SizeCapacity Weight Dimensions Voltage Standard Charge Fast Charge C5000 mAh 57g H43XD23mm 1.2V 15 hours @ 300 mA 2 hours @ 3000 mA D10000 mAh 165g H60XD33mm 1.2V 15 hours @ 800 mA 3 hours @ 4000 mAOther NiMH Rechargeable Battery Combos Also Available Looking for AA Only Battery Combos? Click Here Looking for AAA Only Battery Combos? Click Here Looking for C Only Battery Combos? Click Here Looking for D Only Battery Combos? Click Here Looking for Mix of Various Size Battery Combo Kits? Click Here Looking for Charger Combo Packages? Click Here